Aftermarket Shocks - Revision history

Bokonon: /* Glossary */

2011-09-01T04:55:37Z

Glossary

← Older revision		Revision as of 00:55, 1 September 2011
Line 131:		Line 131:
	'''Preload''': the amount a spring is pre-compressed by the suspension system. Spring preload compresses the spring by a set amount (this amount is usually adjustable, although the stock Ninja 250 shock lacks this adjustment), which corresponds to a certain amount of weight, as determined by the spring rate. See also spring rate.		'''Preload''': the amount a spring is pre-compressed by the suspension system. Spring preload compresses the spring by a set amount (this amount is usually adjustable, although the stock Ninja 250 shock lacks this adjustment), which corresponds to a certain amount of weight, as determined by the spring rate. See also spring rate.

	'''Progressive spring''': a spring which has been wound such that the spring rate is non-linear. Usually a progressive spring will start out very soft, and get stronger as it's further compressed. Most suspension professionals do not recommend progressive springs because they complicate suspension tuning, and can actually make suspension less responsive. See also spring rate.		'''Progressive spring''': a spring which has been wound such that the spring rate is non-linear. Usually a progressive spring will start out very soft, and get stronger as it's further compressed. Most suspension professionals do not recommend progressive springs because they complicate suspension tuning, and can actually make suspension less responsive. See also: spring rate. See also: [[Why Progressive springs are a bad idea]]

	'''Rebound damping''': a reduction in the shock's ability to expand after being compressed. This is a shock's main job. Rebound damping keeps your bike from bouncing up and down like a pogo stick. Adjustable rebound damping is usually desirable, and is more important to have than a compression damping adjustment. See also damping.		'''Rebound damping''': a reduction in the shock's ability to expand after being compressed. This is a shock's main job. Rebound damping keeps your bike from bouncing up and down like a pogo stick. Adjustable rebound damping is usually desirable, and is more important to have than a compression damping adjustment. See also damping.

Bokonon: /* Glossary */

2011-09-01T04:53:55Z

Glossary

← Older revision		Revision as of 00:53, 1 September 2011
Line 119:		Line 119:
	==Glossary==		==Glossary==

	''Ball-check valve'': one of two common methods used to achieve damping in a shock. A ball-check valve is usually implemented as a steel ball pressed into an orifice by a spring. Oil is forced past the ball to achieve damping. See also shim-stack valve and damping.		'''Ball-check valve''': one of two common methods used to achieve damping in a shock. A ball-check valve is usually implemented as a steel ball pressed into an orifice by a spring. Oil is forced past the ball to achieve damping. See also shim-stack valve and damping.

	''Compression damping'': a reduction in the shock's ability to compress freely. Compression damping enhances rideability on the leading edge of a bump. See also damping.		'''Compression damping''': a reduction in the shock's ability to compress freely. Compression damping enhances rideability on the leading edge of a bump. See also damping.

	''Damping'': a reduction in the ability of a shock to move freely. This is typically done by forcing oil through some kind of a restriction. A spring without a shock absorber has no damping whatsoever.		'''Damping''': a reduction in the ability of a shock to move freely. This is typically done by forcing oil through some kind of a restriction. A spring without a shock absorber has no damping whatsoever.

	''Emulsion-type shock'': a shock which provides no barrier between the oil and gas (usually air or nitrogen) in the shock body. Emulsion shocks are typically not pressurized. Because of these two factors, the air and oil can mix (either via churning or cavitation), which reduces damping effectiveness. Contrast with the reservoir-type shock.		'''Emulsion-type shock''': a shock which provides no barrier between the oil and gas (usually air or nitrogen) in the shock body. Emulsion shocks are typically not pressurized. Because of these two factors, the air and oil can mix (either via churning or cavitation), which reduces damping effectiveness. Contrast with the reservoir-type shock.

	The oil and gas mixture will separate after a short period of sitting, and these types of shocks are fine for the street. They just won't hold up under the constant stress of racing.		The oil and gas mixture will separate after a short period of sitting, and these types of shocks are fine for the street. They just won't hold up under the constant stress of racing.

	''Preload'': the amount a spring is pre-compressed by the suspension system. Spring preload compresses the spring by a set amount (this amount is usually adjustable, although the stock Ninja 250 shock lacks this adjustment), which corresponds to a certain amount of weight, as determined by the spring rate. See also spring rate.		'''Preload''': the amount a spring is pre-compressed by the suspension system. Spring preload compresses the spring by a set amount (this amount is usually adjustable, although the stock Ninja 250 shock lacks this adjustment), which corresponds to a certain amount of weight, as determined by the spring rate. See also spring rate.

	''Progressive spring'': a spring which has been wound such that the spring rate is non-linear. Usually a progressive spring will start out very soft, and get stronger as it's further compressed. Most suspension professionals do not recommend progressive springs because they complicate suspension tuning, and can actually make suspension less responsive. See also spring rate.		'''Progressive spring''': a spring which has been wound such that the spring rate is non-linear. Usually a progressive spring will start out very soft, and get stronger as it's further compressed. Most suspension professionals do not recommend progressive springs because they complicate suspension tuning, and can actually make suspension less responsive. See also spring rate.

	''Rebound damping'': a reduction in the shock's ability to expand after being compressed. This is a shock's main job. Rebound damping keeps your bike from bouncing up and down like a pogo stick. Adjustable rebound damping is usually desirable, and is more important to have than a compression damping adjustment. See also damping.		'''Rebound damping''': a reduction in the shock's ability to expand after being compressed. This is a shock's main job. Rebound damping keeps your bike from bouncing up and down like a pogo stick. Adjustable rebound damping is usually desirable, and is more important to have than a compression damping adjustment. See also damping.

	''Reservoir-type shocks'': shocks which provide some kind of barrier, usually either a flexible rubber barrier or a metal piston, between the oil and gas (usually nitrogen) in a shock. Reservoir shocks are usually pressurized. Because of this pressure, the oil can't cavitate under heavy use, making them better suited to high-stress environments such as racing or offroad use. Contrast with the emulsion-type shock.		'''Reservoir-type shocks''': shocks which provide some kind of barrier, usually either a flexible rubber barrier or a metal piston, between the oil and gas (usually nitrogen) in a shock. Reservoir shocks are usually pressurized. Because of this pressure, the oil can't cavitate under heavy use, making them better suited to high-stress environments such as racing or offroad use. Contrast with the emulsion-type shock.

	''Shim-stack valve'': one of two common methods used to achieve damping in a shock. A shim-stack valve is much what it sounds like: a stack of thin pieces of metal, precisely shaped and sized. It is held together by spring pressure, and oil is forced through it to achieve damping. Shim-stack valves are a more modern design than ball-check valves. Their primary advantages are greater flexibility in tuning, and easier tuning. Contrast with the ball-check valve.		'''Shim-stack valve''': one of two common methods used to achieve damping in a shock. A shim-stack valve is much what it sounds like: a stack of thin pieces of metal, precisely shaped and sized. It is held together by spring pressure, and oil is forced through it to achieve damping. Shim-stack valves are a more modern design than ball-check valves. Their primary advantages are greater flexibility in tuning, and easier tuning. Contrast with the ball-check valve.

	''Spring rate'': the amount a given spring compresses for a given weight. Front fork springs are usually expressed in kilograms per millimeter. Rear shock springs are usually expressed in pounds per inch or kilograms per centimeter. For instance, a 450 lb/in spring will compress one inch when 450 lbs is applied to it, or two inches when 900 lbs is applied to it. Spring rates are usually linear unless they're explicitly stated to be progressive. See also progressive spring.		'''Spring rate''': the amount a given spring compresses for a given weight. Front fork springs are usually expressed in kilograms per millimeter. Rear shock springs are usually expressed in pounds per inch or kilograms per centimeter. For instance, a 450 lb/in spring will compress one inch when 450 lbs is applied to it, or two inches when 900 lbs is applied to it. Spring rates are usually linear unless they're explicitly stated to be progressive. See also progressive spring.

Bokonon: /* Glossary */

2011-09-01T04:52:50Z

Glossary

← Older revision		Revision as of 00:52, 1 September 2011
Line 119:		Line 119:
	==Glossary==		==Glossary==

	Ball-check valve: one of two common methods used to achieve damping in a shock. A ball-check valve is usually implemented as a steel ball pressed into an orifice by a spring. Oil is forced past the ball to achieve damping. See also shim-stack valve and damping.		''Ball-check valve'': one of two common methods used to achieve damping in a shock. A ball-check valve is usually implemented as a steel ball pressed into an orifice by a spring. Oil is forced past the ball to achieve damping. See also shim-stack valve and damping.

	Compression damping: a reduction in the shock's ability to compress freely. Compression damping enhances rideability on the leading edge of a bump. See also damping.		''Compression damping'': a reduction in the shock's ability to compress freely. Compression damping enhances rideability on the leading edge of a bump. See also damping.

	Damping: a reduction in the ability of a shock to move freely. This is typically done by forcing oil through some kind of a restriction. A spring without a shock absorber has no damping whatsoever.		''Damping'': a reduction in the ability of a shock to move freely. This is typically done by forcing oil through some kind of a restriction. A spring without a shock absorber has no damping whatsoever.

	Emulsion-type shock: a shock which provides no barrier between the oil and gas (usually air or nitrogen) in the shock body. Emulsion shocks are typically not pressurized. Because of these two factors, the air and oil can mix (either via churning or cavitation), which reduces damping effectiveness. Contrast with the reservoir-type shock.		''Emulsion-type shock'': a shock which provides no barrier between the oil and gas (usually air or nitrogen) in the shock body. Emulsion shocks are typically not pressurized. Because of these two factors, the air and oil can mix (either via churning or cavitation), which reduces damping effectiveness. Contrast with the reservoir-type shock.

	The oil and gas mixture will separate after a short period of sitting, and these types of shocks are fine for the street. They just won't hold up under the constant stress of racing.		The oil and gas mixture will separate after a short period of sitting, and these types of shocks are fine for the street. They just won't hold up under the constant stress of racing.

	Preload: the amount a spring is pre-compressed by the suspension system. Spring preload compresses the spring by a set amount (this amount is usually adjustable, although the stock Ninja 250 shock lacks this adjustment), which corresponds to a certain amount of weight, as determined by the spring rate. See also spring rate.		''Preload'': the amount a spring is pre-compressed by the suspension system. Spring preload compresses the spring by a set amount (this amount is usually adjustable, although the stock Ninja 250 shock lacks this adjustment), which corresponds to a certain amount of weight, as determined by the spring rate. See also spring rate.

	Progressive spring: a spring which has been wound such that the spring rate is non-linear. Usually a progressive spring will start out very soft, and get stronger as it's further compressed. Most suspension professionals do not recommend progressive springs because they complicate suspension tuning, and can actually make suspension less responsive. See also spring rate.		''Progressive spring'': a spring which has been wound such that the spring rate is non-linear. Usually a progressive spring will start out very soft, and get stronger as it's further compressed. Most suspension professionals do not recommend progressive springs because they complicate suspension tuning, and can actually make suspension less responsive. See also spring rate.

	Rebound damping: a reduction in the shock's ability to expand after being compressed. This is a shock's main job. Rebound damping keeps your bike from bouncing up and down like a pogo stick. Adjustable rebound damping is usually desirable, and is more important to have than a compression damping adjustment. See also damping.		''Rebound damping'': a reduction in the shock's ability to expand after being compressed. This is a shock's main job. Rebound damping keeps your bike from bouncing up and down like a pogo stick. Adjustable rebound damping is usually desirable, and is more important to have than a compression damping adjustment. See also damping.

	Reservoir-type shocks: shocks which provide some kind of barrier, usually either a flexible rubber barrier or a metal piston, between the oil and gas (usually nitrogen) in a shock. Reservoir shocks are usually pressurized. Because of this pressure, the oil can't cavitate under heavy use, making them better suited to high-stress environments such as racing or offroad use. Contrast with the emulsion-type shock.		''Reservoir-type shocks'': shocks which provide some kind of barrier, usually either a flexible rubber barrier or a metal piston, between the oil and gas (usually nitrogen) in a shock. Reservoir shocks are usually pressurized. Because of this pressure, the oil can't cavitate under heavy use, making them better suited to high-stress environments such as racing or offroad use. Contrast with the emulsion-type shock.

	Shim-stack valve: one of two common methods used to achieve damping in a shock. A shim-stack valve is much what it sounds like: a stack of thin pieces of metal, precisely shaped and sized. It is held together by spring pressure, and oil is forced through it to achieve damping. Shim-stack valves are a more modern design than ball-check valves. Their primary advantages are greater flexibility in tuning, and easier tuning. Contrast with the ball-check valve.		''Shim-stack valve'': one of two common methods used to achieve damping in a shock. A shim-stack valve is much what it sounds like: a stack of thin pieces of metal, precisely shaped and sized. It is held together by spring pressure, and oil is forced through it to achieve damping. Shim-stack valves are a more modern design than ball-check valves. Their primary advantages are greater flexibility in tuning, and easier tuning. Contrast with the ball-check valve.

	Spring rate: the amount a given spring compresses for a given weight. Front fork springs are usually expressed in kilograms per millimeter. Rear shock springs are usually expressed in pounds per inch or kilograms per centimeter. For instance, a 450 lb/in spring will compress one inch when 450 lbs is applied to it, or two inches when 900 lbs is applied to it. Spring rates are usually linear unless they're explicitly stated to be progressive. See also progressive spring.		''Spring rate'': the amount a given spring compresses for a given weight. Front fork springs are usually expressed in kilograms per millimeter. Rear shock springs are usually expressed in pounds per inch or kilograms per centimeter. For instance, a 450 lb/in spring will compress one inch when 450 lbs is applied to it, or two inches when 900 lbs is applied to it. Spring rates are usually linear unless they're explicitly stated to be progressive. See also progressive spring.

Bokonon: /* WP Suspension */

2010-07-03T14:08:02Z

WP Suspension

← Older revision		Revision as of 10:08, 3 July 2010
Line 100:		Line 100:
	[[Image:wp suspension.jpg\|100px]]		[[Image:wp suspension.jpg\|100px]]

	WP (not to be confused with Works Performance -- WP used to be called White Power, but you can imagine why~~, in this PC age,~~ they changed their name) makes excellent shocks. They don't make a model specifically for the Ninja 250, but they list the EX500 as a supported model. ~~Anything~~ which fits the EX500 will physically fit the EX250, and will be sprung and valved pretty close to correctly.		WP (not to be confused with Works Performance -- WP used to be called White Power, but you can imagine why they changed their name) makes excellent shocks. They don't make a model specifically for the Ninja 250, but they list the EX500 as a supported model. Any shock which fits the EX500 will physically fit the EX250, and will be sprung and valved pretty close to correctly.

	~~The only price I've been able to find~~ is $429 over at [http://www.le-suspension.com/catalog/product_info.php?cPath=22&products_id=48 Lindemann Engineering], but it's for the wrong model of shock. Lindemann has frankly been very snotty to me the last few times I've tried to talk to them, so ~~I'm not inclined to call and see if they can order~~ the ~~correct shock~~. The WP website had me call the US KTM distributor, who said I should call my local dealership. After calling 7 different dealerships, I haven't found one which can even order WP parts. WP doesn't seem to be making a huge effort to sell aftermarket products in the US; there isn't ~~even a US distributor~~ on their [http://www.wpsuspension.com/company/importeur.php distributor list].		There is no US distributor, so the price is only a guess. The WP website had me call the US KTM distributor, who said I should call my local dealership. After calling 7 different dealerships, I haven't found one which can even order WP parts. WP doesn't seem to be making a huge effort to sell aftermarket products in the US; there isn't any information on their [http://www.wpsuspension.com/company/importeur.php distributor list].

	The EX500 shock model number is 17.17.H9.03 according to their fitment list (an Excel spreadsheet file). Click on [http://www.wpsuspension.com/products/rearshocks.php Which for my bike].		The EX500 shock model number is 17.17.H9.03 according to their fitment list (an Excel spreadsheet file). Click on [http://www.wpsuspension.com/products/rearshocks.php Which for my bike].

	The WP shock most likely uses shim-stack valves. Their website says they offer adjustable length standard (which will allow you to raise or lower the rear of the bike), and that the listed shock comes with preload and rebound adjustments. This shock will be suitable for all types of riding, from commuting through racing.		The WP shock most likely uses shim-stack valves. Their website says they offer adjustable length standard (which will allow you to raise or lower the rear of the bike), and that the listed shock comes with preload and rebound adjustments. This shock will be suitable for all types of riding, from commuting through racing.

	==Suspension companies with no EX250 shock==		==Suspension companies with no EX250 shock==

Bokonon at 01:54, 25 October 2009

2009-10-25T01:54:52Z

← Older revision		Revision as of 21:54, 24 October 2009
Line 1:		Line 1:
	[[Category:Suspension]]		[[Category:Suspension]]
			__TOC__

	Researched and written by [http://www.ninja250.org/IanJ IanJ] July, 2006		Researched and written by [http://www.ninja250.org/IanJ IanJ] July, 2006

	====Why a different shock?====		==Why a different shock?==

	One of the deficits of the Ninja 250 is that its stock rear shock is severely undersprung for a heavier rider such as myself. When I bought my new '06, I knew that I would want a better shock, and ended up gathering a good amount of information on what is available. This is an overview of that information.		One of the deficits of the Ninja 250 is that its stock rear shock is severely undersprung for a heavier rider such as myself. When I bought my new '06, I knew that I would want a better shock, and ended up gathering a good amount of information on what is available. This is an overview of that information.

	If you're overwhelmed by terminology, there's a brief glossary at the end of the article.		If you're overwhelmed by terminology, there's a brief glossary at the end of the article.

	~~====What's available====~~

	There are two broad classes of shock available for the Ninja 250: those from other bikes, and those produced specifically for the 250 by the aftermarket. This article focuses on aftermarket shocks built specifically for the Ninja 250.		There are two broad classes of shock available for the Ninja 250: those from other bikes, and those produced specifically for the 250 by the aftermarket. This article focuses on aftermarket shocks built specifically for the Ninja 250.

	====The aftermarket options ====		==The aftermarket options ==

	There may be more than these options available, but this is what I've found so far.		There may be more than these options available, but this is what I've found so far.
Line 108:		Line 108:
	The WP shock most likely uses shim-stack valves. Their website says they offer adjustable length standard (which will allow you to raise or lower the rear of the bike), and that the listed shock comes with preload and rebound adjustments. This shock will be suitable for all types of riding, from commuting through racing.		The WP shock most likely uses shim-stack valves. Their website says they offer adjustable length standard (which will allow you to raise or lower the rear of the bike), and that the listed shock comes with preload and rebound adjustments. This shock will be suitable for all types of riding, from commuting through racing.

	====Suspension companies with no EX250 shock====		==Suspension companies with no EX250 shock==

	The following companies produce suspension components, but don't have a model which fits the Ninja 250 (not an exhaustive list):		The following companies produce suspension components, but don't have a model which fits the Ninja 250 (not an exhaustive list):
Line 117:		Line 117:
	*Wilburs		*Wilburs

	====Glossary====		==Glossary==

	Ball-check valve: one of two common methods used to achieve damping in a shock. A ball-check valve is usually implemented as a steel ball pressed into an orifice by a spring. Oil is forced past the ball to achieve damping. See also shim-stack valve and damping.		Ball-check valve: one of two common methods used to achieve damping in a shock. A ball-check valve is usually implemented as a steel ball pressed into an orifice by a spring. Oil is forced past the ball to achieve damping. See also shim-stack valve and damping.

Bokonon: /* What's available */

2009-07-20T14:05:49Z

What's available

← Older revision		Revision as of 10:05, 20 July 2009
Line 10:		Line 10:
	====What's available====		====What's available====

	There are two broad classes of shock available for the Ninja 250: those ~~from [[Shocks~~ from other bikes~~\|other bikes]]~~, and those produced specifically for the 250 by the aftermarket. This article focuses on aftermarket shocks built specifically for the Ninja 250.		There are two broad classes of shock available for the Ninja 250: those from other bikes, and those produced specifically for the 250 by the aftermarket. This article focuses on aftermarket shocks built specifically for the Ninja 250.

	====The aftermarket options ====		====The aftermarket options ====

Bokonon: /* Hagon */

2008-03-16T16:19:10Z

Hagon

← Older revision		Revision as of 12:19, 16 March 2008
Line 42:		Line 42:
	Hagons use shim-stack valves, and are emulsion (non-reservoir) shocks. They're adjustable for preload, and have a combined adjustment for rebound and compression. The combined adjustment uses a balancing valve system, so all you really have to do is dial in more or less damping, and the shock takes care of the balance between rebound and compression damping.		Hagons use shim-stack valves, and are emulsion (non-reservoir) shocks. They're adjustable for preload, and have a combined adjustment for rebound and compression. The combined adjustment uses a balancing valve system, so all you really have to do is dial in more or less damping, and the shock takes care of the balance between rebound and compression damping.

	Due to the emulsion system and the linked compression and rebound damping, this shock is suitable for commuting through track-day use, but is probably a bit sub-standard for racing. In particular, the emulsion nature of the shock means that hard use will see it cavitating and losing damping, and the linked adjustment may not provide precise enough control for more advanced racers.		Due to the emulsion system and the linked compression and rebound damping, this shock is suitable for commuting through track-day use, but is probably a bit sub-standard for racing. In particular, the emulsion nature of the shock means that hard use will see it cavitating and losing damping, and the linked adjustment may not provide precise enough control for more advanced racers. Here's a comparison of the Hagon and the stock EX250 shock.

			[[Image:Hagon-stock.jpg\|150px]]

	====Ohlins====		====Ohlins====

Bokonon: /* Penske */

2008-01-26T13:27:20Z

Penske

← Older revision		Revision as of 09:27, 26 January 2008
Line 70:		Line 70:
	For racing use, spring the extra $200 for the $800-level fully adjustable shock.		For racing use, spring the extra $200 for the $800-level fully adjustable shock.

	The other reason to consider a Penske is that Penske shocks are modular, and can be easily and relatively cheaply reconfigured for another bike. So, if you're planning on upgrading to a different bike, it might make a lot of sense to upgrade to a Penske shock now, and take it with you when you swap bikes.		The other reason to consider a Penske is that Penske shocks are modular, and can be easily and relatively cheaply reconfigured for another bike. So, if you're planning on upgrading to a different bike, it might make a lot of sense to upgrade to a Penske shock now, and take it with you when you swap bikes.

			An aside from BrianM: "The Penske Sport is only a viable option for someone who wants the full Penske shock, but can't afford the $800 up front. So you buy the Sport now, and then when you get the money together you send the shock back with another $300 and have it converted to an 8981, or $600 and get an 8987 (87 is the triple adjustable, not worth it for anyone shy of a racer)."

			"I can't recommend the Penske Sport without the future upgrade. It's just WAY too expensive for the limited function it returns. Even with the full 8981 iteration, it's pretty expensive for most 250 owners/riders. One of those things to lust after, but not really within the scope of the majority."

	====Works Performance====		====Works Performance====

Bokonon at 17:20, 7 October 2007

2007-10-07T17:20:03Z

← Older revision		Revision as of 13:20, 7 October 2007
Line 10:		Line 10:
	====What's available====		====What's available====

	There are two broad classes of shock available for the Ninja 250: those from other bikes, and those produced specifically for the 250 by the aftermarket. This article focuses on aftermarket shocks built specifically for the Ninja 250.		There are two broad classes of shock available for the Ninja 250: those from [[Shocks from other bikes\|other bikes]], and those produced specifically for the 250 by the aftermarket. This article focuses on aftermarket shocks built specifically for the Ninja 250.

	====The aftermarket options ====		====The aftermarket options ====

Bokonon at 09:31, 7 October 2007

2007-10-07T09:31:38Z

← Older revision		Revision as of 05:31, 7 October 2007
Line 22:		Line 22:
	*Cons: crazy, grumpy distributor; must be ordered from Italy.		*Cons: crazy, grumpy distributor; must be ordered from Italy.

	[[Image:bitubo.jpg\|~~150px~~]]		[[Image:bitubo.jpg\|100px]]

	The Bitubo XZE01 will theoretically fit the Ninja 250. Bitubo has a decent reputation as a maker of suspension components, their products gracing a number of Italian bikes. Their published information is sparse, but we may reasonably conclude that their shocks use a shim-stack valve and an internal reservoir. Adjustments include preload and rebound, but not compression.		The Bitubo XZE01 will theoretically fit the Ninja 250. Bitubo has a decent reputation as a maker of suspension components, their products gracing a number of Italian bikes. Their published information is sparse, but we may reasonably conclude that their shocks use a shim-stack valve and an internal reservoir. Adjustments include preload and rebound, but not compression.
Line 36:		Line 36:
	*Cons: must be ordered from England; emulsion-type (only a factor for racing)		*Cons: must be ordered from England; emulsion-type (only a factor for racing)

	[[Image:hagon.jpg\|~~150px~~]]		[[Image:hagon.jpg\|100px]]

	Dave Quinn is the US distributor for Hagon shocks, and although it's not specifically listed on [http://www.davequinnmotorcycles.com/ his website], the [http://www.hagon-shocks.co.uk/HagShocksPr.htm Hagon website] lists a fitment for the Ninja 250 (search for GPX250R/EX250F). The part number is M64007, and the October, 2007 price is $394. If you need an uprated spring (and at 240 lbs in gear, he said I didn't need an uprated spring), there's an additional $60 fee for the larger spring and valving adjustments.		Dave Quinn is the US distributor for Hagon shocks, and although it's not specifically listed on [http://www.davequinnmotorcycles.com/ his website], the [http://www.hagon-shocks.co.uk/HagShocksPr.htm Hagon website] lists a fitment for the Ninja 250 (search for GPX250R/EX250F). The part number is M64007, and the October, 2007 price is $394. If you need an uprated spring (and at 240 lbs in gear, he said I didn't need an uprated spring), there's an additional $60 fee for the larger spring and valving adjustments.
Line 50:		Line 50:
	*Cons: very expensive; more capable than the bike		*Cons: very expensive; more capable than the bike

	[[Image:ohlins.jpg\|~~150px~~]]		[[Image:ohlins.jpg\|100px]]

	Ohlins is a well-oiled marketing machine. Their suspension components are good, but they're not generally worth the 30% premium over other good suspension components. That's particularly true on the Ninja 250, where the rest of the bike can't match the shock's capabilities. Avoid Ohlins shocks for the Ninja 250 unless you truly have more money than sense.		Ohlins is a well-oiled marketing machine. Their suspension components are good, but they're not generally worth the 30% premium over other good suspension components. That's particularly true on the Ninja 250, where the rest of the bike can't match the shock's capabilities. Avoid Ohlins shocks for the Ninja 250 unless you truly have more money than sense.
Line 62:		Line 62:
	*Cons: expensive; more capable than the bike		*Cons: expensive; more capable than the bike

	[[Image:penske.jpg\|~~150px~~]]		[[Image:penske.jpg\|100px]]

	Penske is in a similar boat with Ohlins. Like Ohlins, their products exceed the Ninja 250's performance, particularly as regards frame and fork stiffness. Unlike Ohlins, the consensus of opinion is that their components are worth the price.		Penske is in a similar boat with Ohlins. Like Ohlins, their products exceed the Ninja 250's performance, particularly as regards frame and fork stiffness. Unlike Ohlins, the consensus of opinion is that their components are worth the price.
Line 78:		Line 78:
	*Cons: ball valve is old tech -- hard to rebuild and tune; pricey for what you get		*Cons: ball valve is old tech -- hard to rebuild and tune; pricey for what you get

	[[Image:works.jpg\|~~150px~~]]		[[Image:works.jpg\|100px]]

	Works has been making shocks for motorcycles since 1973. Unfortunately, they have stuck with that 1973-era technology, and are still using it in all their products. That is, they're using the now-outdated ball-check valve. This makes them harder to adjust and harder to rebuild.		Works has been making shocks for motorcycles since 1973. Unfortunately, they have stuck with that 1973-era technology, and are still using it in all their products. That is, they're using the now-outdated ball-check valve. This makes them harder to adjust and harder to rebuild.
Line 92:		Line 92:
	*Cons: difficult to find; not actually built for the EX250		*Cons: difficult to find; not actually built for the EX250

	WP (not to be confused with Works Performance -- WP used to be called White Power, but you can imagine why, in this PC age, they changed their name) makes excellent shocks. They don't make a model specifically for the Ninja 250, but they list the EX500 as a supported model. Anything which fits the EX500 will physically fit the EX250, and will be sprung and valved pretty close to correctly.		[[Image:wp suspension.jpg\|100px]]

	~~[[Image:wp suspension~~.~~jpg\|150px]]~~		WP (not to be confused with Works Performance -- WP used to be called White Power, but you can imagine why, in this PC age, they changed their name) makes excellent shocks. They don't make a model specifically for the Ninja 250, but they list the EX500 as a supported model. Anything which fits the EX500 will physically fit the EX250, and will be sprung and valved pretty close to correctly.

	The only price I've been able to find is $429 over at [http://www.le-suspension.com/catalog/product_info.php?cPath=22&products_id=48 Lindemann Engineering], but it's for the wrong model of shock. Lindemann has frankly been very snotty to me the last few times I've tried to talk to them, so I'm not inclined to call and see if they can order the correct shock. The WP website had me call the US KTM distributor, who said I should call my local dealership. After calling 7 different dealerships, I haven't found one which can even order WP parts. WP doesn't seem to be making a huge effort to sell aftermarket products in the US; there isn't even a US distributor on their [http://www.wpsuspension.com/company/importeur.php distributor list].		The only price I've been able to find is $429 over at [http://www.le-suspension.com/catalog/product_info.php?cPath=22&products_id=48 Lindemann Engineering], but it's for the wrong model of shock. Lindemann has frankly been very snotty to me the last few times I've tried to talk to them, so I'm not inclined to call and see if they can order the correct shock. The WP website had me call the US KTM distributor, who said I should call my local dealership. After calling 7 different dealerships, I haven't found one which can even order WP parts. WP doesn't seem to be making a huge effort to sell aftermarket products in the US; there isn't even a US distributor on their [http://www.wpsuspension.com/company/importeur.php distributor list].