I want to get some new grips - Revision history

Bokonon at 06:58, 23 January 2012

2012-01-23T06:58:00Z

← Older revision		Revision as of 02:58, 23 January 2012
Line 2:		Line 2:
	Go to any bike shop and you can find a good pair of replacement grips for $6-12. You should be able to find some that are more comfortable than the stock ones. eBay usually has a number of dealers selling grips, too. The [http://www.casporttouring.com/store/merchant.mvc?Screen=CTGY&Category_Code=PROG Pro Grips] brand is quite popular among club members, as are [http://www.ourygrips.com/ Oury Grips]. The Pro Grips have a relatively smooth surface, as opposed to the individual pads offered by the Ourys (similar to the waffle sole on Nikes). Another option is [http://www.casporttouring.com/store/merchant.mvc?Screen=PROD&Product_Code=GPSMALL&Category_Code=grips Grip Puppies], which are foam pads that slip over standard grips.		Go to any bike shop and you can find a good pair of replacement grips for $6-12. You should be able to find some that are more comfortable than the stock ones. eBay usually has a number of dealers selling grips, too. The [http://www.casporttouring.com/store/merchant.mvc?Screen=CTGY&Category_Code=PROG Pro Grips] brand is quite popular among club members, as are [http://www.ourygrips.com/ Oury Grips]. The Pro Grips have a relatively smooth surface, as opposed to the individual pads offered by the Ourys (similar to the waffle sole on Nikes). Another option is [http://www.casporttouring.com/store/merchant.mvc?Screen=PROD&Product_Code=GPSMALL&Category_Code=grips Grip Puppies], which are foam pads that slip over standard grips.

	For grips that help smooth out vibration, see[[Reducing handlebar and footpeg vibration]].		For grips that help smooth out vibration, see [[Reducing handlebar and footpeg vibration]].

	Removing bar ends: DON'T. A lot of members go through lots of work drilling, hammering, even using dynamite to [[Removing & replacing bar ends\|remove the bar ends]] in order to remove the OEM grips. There's really no need, unless you plan to keep those old grips (but why?). You can easily cut them off carefully with a utility knife, then slip the new grips on with soapy water or hairspray. Another reason to cut them off is that some are glued on. There have been reports of one side being glued on while the other wasn't.		Removing bar ends: DON'T. A lot of members go through lots of work drilling, hammering, even using dynamite to [[Removing & replacing bar ends\|remove the bar ends]] in order to remove the OEM grips. There's really no need, unless you plan to keep those old grips (but why?). You can easily cut them off carefully with a utility knife, then slip the new grips on with soapy water or hairspray. Another reason to cut them off is that some are glued on. There have been reports of one side being glued on while the other wasn't.

Bokonon at 06:57, 23 January 2012

2012-01-23T06:57:44Z

← Older revision		Revision as of 02:57, 23 January 2012
Line 1:		Line 1:
	[[Category:Controls & Cables]]		[[Category:Controls & Cables]]
	Go to any bike shop and you can find a good pair of replacement grips for $6-12. You should be able to find some that are more comfortable than the stock ones. eBay usually has a number of dealers selling grips, too. The [http://www.casporttouring.com/store/merchant.mvc?Screen=CTGY&Category_Code=PROG Pro Grips] brand is quite popular among club members, as are [http://www.ourygrips.com/ Oury Grips]. The Pro Grips have a relatively smooth surface, as opposed to the individual pads offered by the Ourys (similar to the waffle sole on Nikes). Another option is [http://www.casporttouring.com/store/merchant.mvc?Screen=PROD&Product_Code=GPSMALL&Category_Code=grips Grip Puppies], which are foam pads that slip over standard grips. [~~http://motorcycleparadise.blogspot.com/2007/07/review-grip-puppies.html Review~~].		Go to any bike shop and you can find a good pair of replacement grips for $6-12. You should be able to find some that are more comfortable than the stock ones. eBay usually has a number of dealers selling grips, too. The [http://www.casporttouring.com/store/merchant.mvc?Screen=CTGY&Category_Code=PROG Pro Grips] brand is quite popular among club members, as are [http://www.ourygrips.com/ Oury Grips]. The Pro Grips have a relatively smooth surface, as opposed to the individual pads offered by the Ourys (similar to the waffle sole on Nikes). Another option is [http://www.casporttouring.com/store/merchant.mvc?Screen=PROD&Product_Code=GPSMALL&Category_Code=grips Grip Puppies], which are foam pads that slip over standard grips.

			For grips that help smooth out vibration, see[[Reducing handlebar and footpeg vibration]].

	Removing bar ends: DON'T. A lot of members go through lots of work drilling, hammering, even using dynamite to [[Removing & replacing bar ends\|remove the bar ends]] in order to remove the OEM grips. There's really no need, unless you plan to keep those old grips (but why?). You can easily cut them off carefully with a utility knife, then slip the new grips on with soapy water or hairspray. Another reason to cut them off is that some are glued on. There have been reports of one side being glued on while the other wasn't.		Removing bar ends: DON'T. A lot of members go through lots of work drilling, hammering, even using dynamite to [[Removing & replacing bar ends\|remove the bar ends]] in order to remove the OEM grips. There's really no need, unless you plan to keep those old grips (but why?). You can easily cut them off carefully with a utility knife, then slip the new grips on with soapy water or hairspray. Another reason to cut them off is that some are glued on. There have been reports of one side being glued on while the other wasn't.

Bokonon at 20:01, 27 January 2010

2010-01-27T20:01:26Z

← Older revision		Revision as of 16:01, 27 January 2010
Line 46:		Line 46:
	To aid in installing the grips, use hairspray or spray adhesive. This not only holds the grips in place once dry, it also keeps you from having to remove the bar ends. The hairspray allows the grips to slide over the bar ends on the Ninja.		To aid in installing the grips, use hairspray or spray adhesive. This not only holds the grips in place once dry, it also keeps you from having to remove the bar ends. The hairspray allows the grips to slide over the bar ends on the Ninja.

	[[Image:grip5.jpg\|~~170px~~]]		[[Image:grip5.jpg\|70px]]

	Before you install the grips, make sure you identify which is the left and which is the right side. As you can see in the following picture, the grip on the right is larger in diameter. This is the grip for the right side. It needs to be bigger for the throttle tube.		Before you install the grips, make sure you identify which is the left and which is the right side. As you can see in the following picture, the grip on the right is larger in diameter. This is the grip for the right side. It needs to be bigger for the throttle tube.

Bokonon at 19:59, 27 January 2010

2010-01-27T19:59:01Z

← Older revision		Revision as of 15:59, 27 January 2010
Line 13:		Line 13:

	:If you should have to do some trimming, insert a socket of the approximate correct diameter, so you have something solid inside the rubber to prevent it from folding. Then, put a ring of masking tape around the grip to give you a good, straight line to follow when you do the cutting.		:If you should have to do some trimming, insert a socket of the approximate correct diameter, so you have something solid inside the rubber to prevent it from folding. Then, put a ring of masking tape around the grip to give you a good, straight line to follow when you do the cutting.

			*If you find that the grips still slide after giving them a good amount of time to dry, you may have used a bit too much hairspray. Pull the grip off, wipe off the excess hairspray, then quickly try to shove the grip back on. Try not to do this 30 minutes away from home, in case the grip doesn't want to go all the way on.

	*The left and right grips do not have the same inner diameter, so don't frustrate yourself trying to get the left-hand grip onto the throttle; it won't fit. The diameter of the bar and grip is smaller on the left side, but the bar end is the same size on both sides. It may be difficult to get the grip over the bar end on the left side because the bar end is much larger than the grip. A lot of soap and twisting should do the trick.		*The left and right grips do not have the same inner diameter, so don't frustrate yourself trying to get the left-hand grip onto the throttle; it won't fit. The diameter of the bar and grip is smaller on the left side, but the bar end is the same size on both sides. It may be difficult to get the grip over the bar end on the left side because the bar end is much larger than the grip. A lot of soap and twisting should do the trick.

Bokonon at 19:23, 17 January 2010

2010-01-17T19:23:36Z

← Older revision		Revision as of 15:23, 17 January 2010
Line 1:		Line 1:
	[[Category:Controls & Cables]]		[[Category:Controls & Cables]]
	Go to any bike shop and you can find a good pair of replacement grips for $6-12. You should be able to find some that are more comfortable than the stock ones. eBay usually has a number of dealers selling grips, too. The [http://www.casporttouring.com/store/merchant.mvc?Screen=CTGY&Category_Code=PROG Pro Grips] brand is quite popular among club members, as are [http://www.ourygrips.com/ Oury Grips]~~. Driven [http://www.newenoughhp.com/accessories/grips__heated_grips/driven/grippy_grips.html Grippy Grips] have a short, rough type of pattern which is indeed very grippy~~. The Pro Grips have a relatively smooth surface, as opposed to the individual pads offered by the Ourys (similar to the waffle sole on Nikes). Another option is [http://www.casporttouring.com/store/merchant.mvc?Screen=PROD&Product_Code=GPSMALL&Category_Code=grips Grip Puppies], which are foam pads that slip over standard grips. [http://motorcycleparadise.blogspot.com/2007/07/review-grip-puppies.html Review].		Go to any bike shop and you can find a good pair of replacement grips for $6-12. You should be able to find some that are more comfortable than the stock ones. eBay usually has a number of dealers selling grips, too. The [http://www.casporttouring.com/store/merchant.mvc?Screen=CTGY&Category_Code=PROG Pro Grips] brand is quite popular among club members, as are [http://www.ourygrips.com/ Oury Grips]. The Pro Grips have a relatively smooth surface, as opposed to the individual pads offered by the Ourys (similar to the waffle sole on Nikes). Another option is [http://www.casporttouring.com/store/merchant.mvc?Screen=PROD&Product_Code=GPSMALL&Category_Code=grips Grip Puppies], which are foam pads that slip over standard grips. [http://motorcycleparadise.blogspot.com/2007/07/review-grip-puppies.html Review].

	Removing bar ends: DON'T. A lot of members go through lots of work drilling, hammering, even using dynamite to [[Removing & replacing bar ends\|remove the bar ends]] in order to remove the OEM grips. There's really no need, unless you plan to keep those old grips (but why?). You can easily cut them off carefully with a utility knife, then slip the new grips on with soapy water or hairspray. Another reason to cut them off is that some are glued on. There have been reports of one side being glued on while the other wasn't.		Removing bar ends: DON'T. A lot of members go through lots of work drilling, hammering, even using dynamite to [[Removing & replacing bar ends\|remove the bar ends]] in order to remove the OEM grips. There's really no need, unless you plan to keep those old grips (but why?). You can easily cut them off carefully with a utility knife, then slip the new grips on with soapy water or hairspray. Another reason to cut them off is that some are glued on. There have been reports of one side being glued on while the other wasn't.

Bokonon at 21:34, 26 September 2009

2009-09-26T21:34:27Z

← Older revision		Revision as of 17:34, 26 September 2009
Line 1:		Line 1:
	[[Category:Controls & Cables]]		[[Category:Controls & Cables]]
	Go to any bike shop and you can find a good pair of replacement grips for $6-12. You should be able to find some that are more comfortable than the stock ones. eBay usually has a number of dealers selling grips, too. The [http://www.casporttouring.com/store/merchant.mvc?Screen=CTGY&Category_Code=PROG Pro Grips] brand is quite popular among club members, as are [http://www.ourygrips.com/ Oury Grips]. Driven [http://www.newenoughhp.com/accessories/grips__heated_grips/driven/grippy_grips.html Grippy Grips] have a short, rough type of pattern which is indeed very grippy. The Pro Grips have a relatively smooth surface, as opposed to the individual pads offered by the Ourys (similar to the waffle sole on Nikes).		Go to any bike shop and you can find a good pair of replacement grips for $6-12. You should be able to find some that are more comfortable than the stock ones. eBay usually has a number of dealers selling grips, too. The [http://www.casporttouring.com/store/merchant.mvc?Screen=CTGY&Category_Code=PROG Pro Grips] brand is quite popular among club members, as are [http://www.ourygrips.com/ Oury Grips]. Driven [http://www.newenoughhp.com/accessories/grips__heated_grips/driven/grippy_grips.html Grippy Grips] have a short, rough type of pattern which is indeed very grippy. The Pro Grips have a relatively smooth surface, as opposed to the individual pads offered by the Ourys (similar to the waffle sole on Nikes). Another option is [http://www.casporttouring.com/store/merchant.mvc?Screen=PROD&Product_Code=GPSMALL&Category_Code=grips Grip Puppies], which are foam pads that slip over standard grips. [http://motorcycleparadise.blogspot.com/2007/07/review-grip-puppies.html Review].

	Removing bar ends: DON'T. A lot of members go through lots of work drilling, hammering, even using dynamite to [[Removing & replacing bar ends\|remove the bar ends]] in order to remove the OEM grips. There's really no need, unless you plan to keep those old grips (but why?). You can easily cut them off carefully with a utility knife, then slip the new grips on with soapy water or hairspray. Another reason to cut them off is that some are glued on. There have been reports of one side being glued on while the other wasn't.		Removing bar ends: DON'T. A lot of members go through lots of work drilling, hammering, even using dynamite to [[Removing & replacing bar ends\|remove the bar ends]] in order to remove the OEM grips. There's really no need, unless you plan to keep those old grips (but why?). You can easily cut them off carefully with a utility knife, then slip the new grips on with soapy water or hairspray. Another reason to cut them off is that some are glued on. There have been reports of one side being glued on while the other wasn't.

Bokonon at 11:22, 15 August 2009

2009-08-15T11:22:30Z

← Older revision		Revision as of 07:22, 15 August 2009
Line 2:		Line 2:
	Go to any bike shop and you can find a good pair of replacement grips for $6-12. You should be able to find some that are more comfortable than the stock ones. eBay usually has a number of dealers selling grips, too. The [http://www.casporttouring.com/store/merchant.mvc?Screen=CTGY&Category_Code=PROG Pro Grips] brand is quite popular among club members, as are [http://www.ourygrips.com/ Oury Grips]. Driven [http://www.newenoughhp.com/accessories/grips__heated_grips/driven/grippy_grips.html Grippy Grips] have a short, rough type of pattern which is indeed very grippy. The Pro Grips have a relatively smooth surface, as opposed to the individual pads offered by the Ourys (similar to the waffle sole on Nikes).		Go to any bike shop and you can find a good pair of replacement grips for $6-12. You should be able to find some that are more comfortable than the stock ones. eBay usually has a number of dealers selling grips, too. The [http://www.casporttouring.com/store/merchant.mvc?Screen=CTGY&Category_Code=PROG Pro Grips] brand is quite popular among club members, as are [http://www.ourygrips.com/ Oury Grips]. Driven [http://www.newenoughhp.com/accessories/grips__heated_grips/driven/grippy_grips.html Grippy Grips] have a short, rough type of pattern which is indeed very grippy. The Pro Grips have a relatively smooth surface, as opposed to the individual pads offered by the Ourys (similar to the waffle sole on Nikes).

	Removing bar ends: DON'T. A lot of members go ~~thru~~ lots of work drilling, hammering, even using dynamite to [[Removing & replacing bar ends\|remove the bar ends]] in order to remove the ~~oem~~ grips. There's really no need, unless you plan to keep those old grips (but why?). You can easily cut them off carefully with a ~~razor blade~~, then slip the new grips on with soapy water or hairspray. Another reason to cut them off is that some are glued on. There have been reports of one side being glued on, while the other wasn't.		Removing bar ends: DON'T. A lot of members go through lots of work drilling, hammering, even using dynamite to [[Removing & replacing bar ends\|remove the bar ends]] in order to remove the OEM grips. There's really no need, unless you plan to keep those old grips (but why?). You can easily cut them off carefully with a utility knife, then slip the new grips on with soapy water or hairspray. Another reason to cut them off is that some are glued on. There have been reports of one side being glued on while the other wasn't.

	To remove: Take a ~~razor (or~~ sharp utility knife) and cut off the old grips from the bar up ~~(that~~ is, do not cut down into the grip; work the edge of the ~~razor~~ under the grip, and cut in an upward motion, to avoid scratching the bars).		To remove: Take a sharp utility knife and cut off the old grips from the bar up. That is, do not cut down into the grip; work the edge of the blade under the grip and cut in an upward motion, to avoid scratching the bars or damaging the throttle tube.

	Then take your new grips, and apply a little soapy water to the inside of the grip and to the bar itself ~~(you~~ can also use hairspray, should you have some Extra Super Hold left over from the 80's). The soapy water or hair spray will make it easy to slide the new grips on, then after a few hours will dry to leave a good seal that will keep those grips stuck on there. Some members have reported slippage using hair spray, although most haven't. If you have some spray adhesive around, that would be a good alternative. Before you affix them permanently, see the first Note below.		Then take your new grips and apply a little soapy water to the inside of the grip and to the bar itself. You can also use hairspray, should you have some Extra Super Hold left over from the 80's. The soapy water or hair spray will make it easy to slide the new grips on, then after a few hours will dry to leave a good seal that will keep those grips stuck on there. Some members have reported slippage using hair spray, although most haven't. If you have some spray adhesive around, that would be a good alternative. Before you affix them permanently, see the first Note below.

	'''Notes:'''		'''Notes:'''
Line 18:		Line 18:
	*Any fun-colored gel grips you get will inevitably be some shade of gray in a week or two.		*Any fun-colored gel grips you get will inevitably be some shade of gray in a week or two.

	*One trick you can try is to use compressed air and blow it under the grip. Lift up the outboard edge of the grip, and jet some air under there. Working quickly, you can have a grip on or off in seconds, with no residues to worry about.		*One trick you can try is to use compressed air and blow it under the grip. Lift up the outboard edge of the grip and jet some air under there. Working quickly, you can have a grip on or off in seconds, with no residues to worry about.

	'''Replacing the grips'''		'''Replacing the grips'''
Line 30:		Line 30:
	[[Image:grip1.jpg\|170px]]		[[Image:grip1.jpg\|170px]]

	Since you probably won't be trying to save the old grips, just cut them off ~~with a razor blade~~.		Since you probably won't be trying to save the old grips, just cut them off.

	[[Image:grip2.jpg\|170px]]		[[Image:grip2.jpg\|170px]]
Line 50:		Line 50:
	[[Image:grip6.jpg\|170px]]		[[Image:grip6.jpg\|170px]]

	The trick is to spray your adhesive into the inside of the grip to help it slide on. Once the hairspray dries, it becomes tacky, helping to hold the grip in place.		The trick is to spray your adhesive into the inside of the grip to help it slide on. Once the hairspray dries it becomes tacky, helping to hold the grip in place.

	[[Image:grip7.jpg\|170px]]		[[Image:grip7.jpg\|170px]]

Bokonon at 05:53, 26 April 2009

2009-04-26T05:53:17Z

← Older revision		Revision as of 01:53, 26 April 2009
Line 64:		Line 64:
	Repeat the process for the left side. Make sure you let the hairspray/glue dry before you ride the bike. On a hot, sunny day this should be about 1/2 an hour or so. Also, make sure the throttle doesn't bind before you ride.		Repeat the process for the left side. Make sure you let the hairspray/glue dry before you ride the bike. On a hot, sunny day this should be about 1/2 an hour or so. Also, make sure the throttle doesn't bind before you ride.

	~~And:~~ Looking good! Feeling good!		Looking good! Feeling good!

	[[Image:grip10.jpg\|170px]]		[[Image:grip10.jpg\|170px]]

Bokonon at 08:54, 13 December 2008

2008-12-13T08:54:56Z

← Older revision		Revision as of 04:54, 13 December 2008
Line 1:		Line 1:
	[[Category:Controls & Cables]]		[[Category:Controls & Cables]]
	Go to any bike shop and you can find a good pair of replacement grips for $6-12. You should be able to find some that are more comfortable than the stock ones. eBay usually has a number of dealers selling grips, too. The~~<BR>~~ [http://www.casporttouring.com/store/merchant.mvc?Screen=CTGY&Category_Code=PROG Pro Grips] brand is quite popular among club members, as are [http://www.ourygrips.com/ Oury Grips]. Driven [http://www.newenoughhp.com/accessories/grips__heated_grips/driven/grippy_grips.html Grippy Grips] have a short, rough type of pattern which is indeed very grippy. The Pro Grips have a relatively smooth surface, as opposed to the individual pads offered by the Ourys (similar to the waffle sole on Nikes).		Go to any bike shop and you can find a good pair of replacement grips for $6-12. You should be able to find some that are more comfortable than the stock ones. eBay usually has a number of dealers selling grips, too. The [http://www.casporttouring.com/store/merchant.mvc?Screen=CTGY&Category_Code=PROG Pro Grips] brand is quite popular among club members, as are [http://www.ourygrips.com/ Oury Grips]. Driven [http://www.newenoughhp.com/accessories/grips__heated_grips/driven/grippy_grips.html Grippy Grips] have a short, rough type of pattern which is indeed very grippy. The Pro Grips have a relatively smooth surface, as opposed to the individual pads offered by the Ourys (similar to the waffle sole on Nikes).

	Removing bar ends: DON'T. A lot of members go thru lots of work drilling, hammering, even using dynamite to [[Removing & replacing bar ends\|remove the bar ends]] in order to remove the oem grips. There's really no need, unless you plan to keep those old grips (but why?). You can easily cut them off carefully with a razor blade, then slip the new grips on with soapy water or hairspray. Another reason to cut them off is that some are glued on. There have been reports of one side being glued on, while the other wasn't.		Removing bar ends: DON'T. A lot of members go thru lots of work drilling, hammering, even using dynamite to [[Removing & replacing bar ends\|remove the bar ends]] in order to remove the oem grips. There's really no need, unless you plan to keep those old grips (but why?). You can easily cut them off carefully with a razor blade, then slip the new grips on with soapy water or hairspray. Another reason to cut them off is that some are glued on. There have been reports of one side being glued on, while the other wasn't.

Bokonon at 08:54, 13 December 2008

2008-12-13T08:54:04Z

← Older revision		Revision as of 04:54, 13 December 2008
Line 1:		Line 1:
	[[Category:Controls & Cables]]		[[Category:Controls & Cables]]
	Go to any bike shop and you can find a good pair of replacement grips for $6-12. You should be able to find some that are more comfortable than the stock ones. eBay usually has a number of dealers selling grips, too. The<BR> [http://www.casporttouring.com/store/merchant.mvc?Screen=CTGY&Category_Code=PROG Pro Grips] brand is quite popular among club members, as are [http://www.ourygrips.com/ Oury Grips]. The Pro Grips have a relatively smooth surface, as opposed to the individual pads offered by the Ourys (similar to the waffle sole on Nikes)~~. Give them a good test at the dealer, or be prepared to try them out before installation and send them back if they're not comfortable, if you order online~~.		Go to any bike shop and you can find a good pair of replacement grips for $6-12. You should be able to find some that are more comfortable than the stock ones. eBay usually has a number of dealers selling grips, too. The<BR> [http://www.casporttouring.com/store/merchant.mvc?Screen=CTGY&Category_Code=PROG Pro Grips] brand is quite popular among club members, as are [http://www.ourygrips.com/ Oury Grips]. Driven [http://www.newenoughhp.com/accessories/grips__heated_grips/driven/grippy_grips.html Grippy Grips] have a short, rough type of pattern which is indeed very grippy. The Pro Grips have a relatively smooth surface, as opposed to the individual pads offered by the Ourys (similar to the waffle sole on Nikes).

	Removing bar ends: DON'T. A lot of members go thru lots of work drilling, hammering, even using dynamite to [[Removing & replacing bar ends\|remove the bar ends]] in order to remove the oem grips. There's really no need, unless you plan to keep those old grips (but why?). You can easily cut them off carefully with a razor blade, then slip the new grips on with soapy water or hairspray. Another reason to cut them off is that some are glued on. There have been reports of one side being glued on, while the other wasn't.		Removing bar ends: DON'T. A lot of members go thru lots of work drilling, hammering, even using dynamite to [[Removing & replacing bar ends\|remove the bar ends]] in order to remove the oem grips. There's really no need, unless you plan to keep those old grips (but why?). You can easily cut them off carefully with a razor blade, then slip the new grips on with soapy water or hairspray. Another reason to cut them off is that some are glued on. There have been reports of one side being glued on, while the other wasn't.