Removing the speedometer, odometer & tripmeter: Difference between revisions

(2 intermediate revisions by the same user not shown)

Line 1:

[[Category: Controls & Cables]]

These three items are all connected together in the gauge cluster, but once you take them out you can take them apart. For more information on ~~these parts~~ of your bike [[Speedometer Error~~|see this article~~]] and ~~look at~~ [[Reattaching the speedometer cable & retainer~~|this one~~]].

These three items are all connected together in the gauge cluster, but once you take them out you can take them apart. For more information on this part of your bike see [[Speedometer Error]] and/or [[Reattaching the speedometer cable & retainer]].

To get started:

Line 8:

*Remove instrument cluster from bracket (three 8mm nuts on the back of the cluster). Take care to note that there are three black metal washers located under the nuts. They tend to stick to the rubber bushings that the cluster mounts to.

Now that you're down to the gauge cluster, separate the white plastic back housing from the black front housing by removing the phillips screws from the rear. (Pay no attention to the circles in this photo; in FAQ, we use what we have.)

Now that you're down to the gauge cluster, separate the white plastic back housing from the black front housing by removing the phillips screws from the rear. (Pay no attention to the circles in this photo; in FAQ we use what we have.)

[[image:speedo removal 1.jpg|150px]]

@@ Line 1: / Line 1: @@
 [[Category: Controls & Cables]]
-These three items are all connected together in the gauge cluster, but once you take them out you can take them apart. For more information on these parts of your bike [[Speedometer Error|see this article]] and look at [[Reattaching the speedometer cable & retainer|this one]].
+These three items are all connected together in the gauge cluster, but once you take them out you can take them apart. For more information on this part of your bike see [[Speedometer Error]] and/or [[Reattaching the speedometer cable & retainer]].
 To get started:
@@ Line 8: / Line 8: @@
 *Remove instrument cluster from bracket (three 8mm nuts on the back of the cluster). Take care to note that there are three black metal washers located under the nuts. They tend to stick to the rubber bushings that the cluster mounts to.
-Now that you're down to the gauge cluster, separate the white plastic back housing from the black front housing by removing the phillips screws from the rear. (Pay no attention to the circles in this photo; in FAQ, we use what we have.)
+Now that you're down to the gauge cluster, separate the white plastic back housing from the black front housing by removing the phillips screws from the rear. (Pay no attention to the circles in this photo; in FAQ we use what we have.)
 [[image:speedo removal 1.jpg|150px]]