I want to get some new grips: Difference between revisions

(2 intermediate revisions by the same user not shown)

Line 1:

[[Category:Controls & Cables]]

Go to any bike shop and you can find a good pair of replacement grips for $6-12. You should be able to find some that are more comfortable than the stock ones. eBay usually has a number of dealers selling grips, too. The [http://www.casporttouring.com/store/merchant.mvc?Screen=CTGY&Category_Code=PROG Pro Grips] brand is quite popular among club members, as are [http://www.ourygrips.com/ Oury Grips]. The Pro Grips have a relatively smooth surface, as opposed to the individual pads offered by the Ourys (similar to the waffle sole on Nikes). Another option is [http://www.casporttouring.com/store/merchant.mvc?Screen=PROD&Product_Code=GPSMALL&Category_Code=grips Grip Puppies], which are foam pads that slip over standard grips. [~~http://motorcycleparadise.blogspot.com/2007/07/review-grip-puppies.html Review~~].

Go to any bike shop and you can find a good pair of replacement grips for $6-12. You should be able to find some that are more comfortable than the stock ones. eBay usually has a number of dealers selling grips, too. The [http://www.casporttouring.com/store/merchant.mvc?Screen=CTGY&Category_Code=PROG Pro Grips] brand is quite popular among club members, as are [http://www.ourygrips.com/ Oury Grips]. The Pro Grips have a relatively smooth surface, as opposed to the individual pads offered by the Ourys (similar to the waffle sole on Nikes). Another option is [http://www.casporttouring.com/store/merchant.mvc?Screen=PROD&Product_Code=GPSMALL&Category_Code=grips Grip Puppies], which are foam pads that slip over standard grips.

For grips that help smooth out vibration, see [[Reducing handlebar and footpeg vibration]].

Removing bar ends: DON'T. A lot of members go through lots of work drilling, hammering, even using dynamite to [[Removing & replacing bar ends|remove the bar ends]] in order to remove the OEM grips. There's really no need, unless you plan to keep those old grips (but why?). You can easily cut them off carefully with a utility knife, then slip the new grips on with soapy water or hairspray. Another reason to cut them off is that some are glued on. There have been reports of one side being glued on while the other wasn't.

Line 46:

Line 48:

To aid in installing the grips, use hairspray or spray adhesive. This not only holds the grips in place once dry, it also keeps you from having to remove the bar ends. The hairspray allows the grips to slide over the bar ends on the Ninja.

[[Image:grip5.jpg|~~170px~~]]

[[Image:grip5.jpg|70px]]

Before you install the grips, make sure you identify which is the left and which is the right side. As you can see in the following picture, the grip on the right is larger in diameter. This is the grip for the right side. It needs to be bigger for the throttle tube.

@@ Line 1: / Line 1: @@
 [[Category:Controls & Cables]]
-Go to any bike shop and you can find a good pair of replacement grips for $6-12. You should be able to find some that are more comfortable than the stock ones. eBay usually has a number of dealers selling grips, too. The [http://www.casporttouring.com/store/merchant.mvc?Screen=CTGY&Category_Code=PROG Pro Grips] brand is quite popular among club members, as are [http://www.ourygrips.com/ Oury Grips]. The Pro Grips have a relatively smooth surface, as opposed to the individual pads offered by the Ourys (similar to the waffle sole on Nikes). Another option is [http://www.casporttouring.com/store/merchant.mvc?Screen=PROD&Product_Code=GPSMALL&Category_Code=grips Grip Puppies], which are foam pads that slip over standard grips. [http://motorcycleparadise.blogspot.com/2007/07/review-grip-puppies.html Review].
+Go to any bike shop and you can find a good pair of replacement grips for $6-12. You should be able to find some that are more comfortable than the stock ones. eBay usually has a number of dealers selling grips, too. The [http://www.casporttouring.com/store/merchant.mvc?Screen=CTGY&Category_Code=PROG Pro Grips] brand is quite popular among club members, as are [http://www.ourygrips.com/ Oury Grips]. The Pro Grips have a relatively smooth surface, as opposed to the individual pads offered by the Ourys (similar to the waffle sole on Nikes). Another option is [http://www.casporttouring.com/store/merchant.mvc?Screen=PROD&Product_Code=GPSMALL&Category_Code=grips Grip Puppies], which are foam pads that slip over standard grips.
+For grips that help smooth out vibration, see [[Reducing handlebar and footpeg vibration]].
 Removing bar ends: DON'T. A lot of members go through lots of work drilling, hammering, even using dynamite to [[Removing & replacing bar ends|remove the bar ends]] in order to remove the OEM grips. There's really no need, unless you plan to keep those old grips (but why?). You can easily cut them off carefully with a utility knife, then slip the new grips on with soapy water or hairspray. Another reason to cut them off is that some are glued on. There have been reports of one side being glued on while the other wasn't.
@@ Line 46: / Line 48: @@
 To aid in installing the grips, use hairspray or spray adhesive. This not only holds the grips in place once dry, it also keeps you from having to remove the bar ends. The hairspray allows the grips to slide over the bar ends on the Ninja.
-[[Image:grip5.jpg|170px]]
+[[Image:grip5.jpg|70px]]
 Before you install the grips, make sure you identify which is the left and which is the right side. As you can see in the following picture, the grip on the right is larger in diameter. This is the grip for the right side. It needs to be bigger for the throttle tube.