Supporting Your Bike While Servicing: Difference between revisions

Line 48:

You can also prop the engine with a jack or jackstand (which goes under the oil drain bolt). <b>This method is less stable</b>, but allows you to raise or lower the front end smoothly, and with some jacks there is no need to remove the lower fairing.

'''2)''' Of course, there is a civilized way of supporting the front: Use a front stand. But be careful when you do so. You '''have to''' either use a centerstand that is tall enough to keep the rear wheel off the ground or a rear/swingarm stand along with the front stand. Having the rear wheel on the ground and the front on a stand is just one small step more stable than the bike standing by itself on its own 2 wheels.

'''2)''' Of course, there is a civilized way of supporting the front: Use a front stand. But be careful when you do so. You '''have to''' either use a centerstand that is tall enough to keep the rear wheel off the ground or a rear/swingarm stand along with the front stand. Having the rear wheel on the ground and the front on a stand is just one small step more stable than the bike standing by itself on its own 2 wheels. Also, make sure you take the bike off the '''front''' stand first.

You should really only use the centerstand/front stand combination for short-term projects (less than one day). Longer than that and the rear stand adds noticeably more stability to the whole setup.

@@ Line 48: / Line 48: @@
 You can also prop the engine with a jack or jackstand (which goes under the oil drain bolt). <b>This method is less stable</b>, but allows you to raise or lower the front end smoothly, and with some jacks there is no need to remove the lower fairing.
-'''2)''' Of course, there is a civilized way of supporting the front: Use a front stand. But be careful when you do so. You '''have to''' either use a centerstand that is tall enough to keep the rear wheel off the ground or a rear/swingarm stand along with the front stand. Having the rear wheel on the ground and the front on a stand is just one small step more stable than the bike standing by itself on its own 2 wheels.
+'''2)''' Of course, there is a civilized way of supporting the front: Use a front stand. But be careful when you do so. You '''have to''' either use a centerstand that is tall enough to keep the rear wheel off the ground or a rear/swingarm stand along with the front stand. Having the rear wheel on the ground and the front on a stand is just one small step more stable than the bike standing by itself on its own 2 wheels. Also, make sure you take the bike off the '''front''' stand first.
 You should really only use the centerstand/front stand combination for short-term projects (less than one day). Longer than that and the rear stand adds noticeably more stability to the whole setup.