Cleaning the carbs 1: Difference between revisions
| Line 80: | Line 80: | ||
*Try a [http://en.wikipedia.org/wiki/List_of_screw_drives#Pozidriv Pozidriv] screwdriver or bit (a #2 in this case). You may find that this fits the screw slots better than a regular phillips, although our man's success was on screws which were 'pre-rounded' by Mr Previous Owner. | *Try a [http://en.wikipedia.org/wiki/List_of_screw_drives#Pozidriv Pozidriv] screwdriver or bit (a #2 in this case). You may find that this fits the screw slots better than a regular phillips, although our man's success was on screws which were 'pre-rounded' by Mr Previous Owner. | ||
*Some drywall driver bits work well for JIS screw heads, although they are supposed to be regular phillips heads. | *Some drywall driver bits work well for JIS screw heads, although they are supposed to be regular phillips heads. Some of our members have had very good results with these, and they're cheap. | ||
*Take a Dremel and cut slots in the screws, then use a flathead screwdriver to remove the ridiculously soft metal screws. You may have to cut a piece off of the idle adjustment bracket to get at one of the screws. | *Take a Dremel and cut slots in the screws, then use a flathead screwdriver to remove the ridiculously soft metal screws. You may have to cut a piece off of the idle adjustment bracket to get at one of the screws. | ||