Opening your garage door with your light switch: Difference between revisions

← Older edit Newer edit →

@@ Line 16: / Line 16: @@
 [[Image:IMG_0722.jpg|150px]]
-The ~16 gauge wire is tapped into 2 of the 3 wires heading into the headlight. The only wire left out is the red/black wire. (See the [[Wiring Schematic|Wiring Schematic]].) Shown here is the wire tap used. You use them by putting two wires through two holes and clamping down on a metal clip with pliers. The clip then slices into both wires and closes the connection between them. Here is a picture of a wire tap:
+The ~16 gauge wire is tapped into 2 of the 3 wires heading into the headlight. The only wire left out is the red/black wire. (See the [[Wiring schematics & diagrams|Wiring Schematic]].) Shown here is the wire tap used. You use them by putting two wires through two holes and clamping down on a metal clip with pliers. The clip then slices into both wires and closes the connection between them. Here is a picture of a wire tap:
 [[Image:IMG_0711a.jpg|150px]]