Lubing the cables: Difference between revisions
No edit summary |
No edit summary |
||
| Line 12: | Line 12: | ||
[[Image:Clutch_cable_lube_2.jpg|150px]] | [[Image:Clutch_cable_lube_2.jpg|150px]] | ||
At this point, do yourself a favor and depress the clutch switch (a small, 1/8" diameter, 1/4" long spring-loaded piece of plastic that is activated by squeezing/releasing the clutch lever) and use a piece of tape to keep it depressed while you are working, as it is very easily broken off. It can be difficult to do before starting, so | At this point, do yourself a favor and depress the clutch switch (a small, 1/8" diameter, 1/4" long spring-loaded piece of plastic that is activated by squeezing/releasing the clutch lever) and use a piece of tape to keep it depressed while you are working, as it is very easily broken off. It can be difficult to do this before starting, so wait until after removing the cable. The switch is most prone to breaking while reconnecting the cable. Don't forget to remove the tape when you are done. | ||
[[image:clutch switch.jpg|150px]] | [[image:clutch switch.jpg|150px]] | ||