A beginner's guide to maintenance tools: Difference between revisions

This is the ULTRA beginners guide, for those who haven't ''any'' experience, much less tools. For those folks, the prospect is often a daunting one when it comes to doing any sort of work on their precious new bikes. You're worried about screwing something up, voiding the warranty, and just generally getting in over your head. Well, not to worry. If you can read and use your hands, then you have what it takes to do anything your bike might need.  

Just like gear is needed before you start riding, information is needed before you start wrenching. This forum, its associated FAQ, and its archive search are an amazing free resource. Chances are that no matter what you plan on doing, a handful of members have already done the same job. And it's even fairly likely that there's a pictorial write-up floating about with step-by-step instructions. But that doesn't mean you should skip out on buying the [[Service Manual|factory service manuals]] ~ there's a LOT of detailed information in those 2 manuals that's not found anywhere else. And yes, that includes the cheap aftermarket knock-offs (like Haynes). There is sometimes information in those that is just blatantly wrong. Since this is asked from time to time, there are no legal downloads of the manuals. It's not on CD, and be wary of the copies on eBay ~ Kawasaki takes its copyright laws seriously.  

Now that you have the information available, it's a good idea to thoroughly read and research whatever task you're going to tackle. Know if you will need any consumable parts, like o-rings, crush washers, or gaskets, and order those well before you plan on doing the work. Know the [[Torque Values]] of all the bolts you're going to be touching, and you might even want to photocopy the page(s) you'll be using so they're handy for quick reference without smudging up your books. There's nothing worse than doing some simple service and having to put it all on hold while you look up the next step in the process or wait for a part to be delivered. If you've got all your information together and you're still hesitant, ask if there's anyone in the area that can help ~ there are members all over the place with different levels of mechanical skill. One may be near you and able to help.  

This is a touchy topic with a lot of 'right' answers. It's a good idea to make sure that the stuff you use most often is of the highest quality, with the stuff you use only occasionally cheap. There's an old saying that 'Only a wealthy man can afford cheap tools', because the tools themselves will break, and they'll do a sub-par job. The best example is trying to remove a phillips screw: most cheap screwdrivers will not grip the screw very well and will end up stripping out the head in short order. Then you will have to worry about trying to get it out [[I need to remove a stripped screw|some other way]], when a good tool would have don it the first time. Spend your money on the best you can afford; you'll be doing these purchases in small steps, so it's not out of the question that you could buy Snap-On/Mac/Matco type tools. See the [[Ratings Of Tools By Brand|tool article]] for a discussion of tool brands.

The first maintenance item most riders are likely to perform will be changing the oil. Not a very daunting task, you've heard it said. Maybe you've seen it done with family cars. There are only 2 bolts, and they're the same size (17mm on the 250). So, the first tool purchase is going to be a 3/8-drive  socket wrench and a set of sockets ''or'' a set of combination wrenches. Sockets are generally a little easier to use, especially for this particular task, but they cannot be used on all aspects of motorcycle maintenance. If you buy a set, the important sizes are 8,10,12,14,17, and 19mm. For the EX250, you'll also need 22mm and 24mm sockets for the axles. 13 and 15mm are usually included in such sets but are rarely used on motorcycles (they will come in handy if you work on metric cars, though). See here for another look at [[What should a good set of tools include?|what should be in your toolbox]].