Mounting & balancing tires yourself: Difference between revisions

Line 117:

[[Image:mount balance 14.JPG|150px]]

Then, push the first bead into the center of the rim, put some lube on the bead that is still outside the rim, and slowly work the tire on with your irons. It is important that you put the bead that is already all the way on the rim into the center of the rim (the deepest part), and not against the side of the rim on the far side. This will give your tire more slack, and will make it less likely that you'll have to bust your fingers trying to get the second bead on.

Then, push the first bead into the center of the rim, put some lube (see [[Tire Mounting Hints & Tips|Hints & Tips]]) on the bead that is still outside the rim, and slowly work the tire on with your irons. It is important that you put the bead that is already all the way on the rim into the center of the rim (the deepest part), and not against the side of the rim on the far side. This will give your tire more slack, and will make it less likely that you'll have to bust your fingers trying to get the second bead on.

There are no pictures of this process, as it's impossible to stop without having the tire work its way off the rim. Here's Leon to give you a good idea of how it works. Keep your knees on the part that's already on the rim, the first bead in the low center part of the rim, work your way around with your tire irons, and it should only be difficult the last little bit.

@@ Line 117: / Line 117: @@
 [[Image:mount balance 14.JPG|150px]]
-Then, push the first bead into the center of the rim, put some lube on the bead that is still outside the rim, and slowly work the tire on with your irons. It is important that you put the bead that is already all the way on the rim into the center of the rim (the deepest part), and not against the side of the rim on the far side. This will give your tire more slack, and will make it less likely that you'll have to bust your fingers trying to get the second bead on.
+Then, push the first bead into the center of the rim, put some lube (see [[Tire Mounting Hints & Tips|Hints & Tips]]) on the bead that is still outside the rim, and slowly work the tire on with your irons. It is important that you put the bead that is already all the way on the rim into the center of the rim (the deepest part), and not against the side of the rim on the far side. This will give your tire more slack, and will make it less likely that you'll have to bust your fingers trying to get the second bead on.
 There are no pictures of this process, as it's impossible to stop without having the tire work its way off the rim. Here's Leon to give you a good idea of how it works. Keep your knees on the part that's already on the rim, the first bead in the low center part of the rim, work your way around with your tire irons, and it should only be difficult the last little bit.