I want a new windscreen: Difference between revisions

Line 7:

'''[http://www.members.aol.com/dukestor/windshield/windshield.html Duke]'''

Duke makes a 16" tall Touring shield. He also has a smaller Sport model.

Duke makes a 16" tall Touring shield. He also has a smaller Sport model. Unfortunately, he also has a full-time job and has been unable to meet all requests in recent months. Please email him to see if he can make one for you.

'''[http://members.cox.net/michealmims/mikesshields.htm gti20vturbo]'''

Mike has three models available, from 13.5" to 18" tall.

Mike has three models available, from 13.5" to 18" tall. This is also a hands-on, in-his-spare-time operation, so write ahead of time for availability.

Line 24:

[[Image:reflex01.jpg|200px]] [[Image:reflex02.jpg|150px]] [[Image:reflex03.jpg|180px]]

Modifications to the windshield in blk95's own words:

Modifications to the [http://powersports.honda.com/scooters/ Honda NSS250] windshield, in blk95's own words:

"I had to cut off four original mounting tabs of plastic with a ~~dremmel~~ tool. It then fit right on the fairing and with a little pressure I could mark where to drill the holes for the mounting screws. I used rubber well nuts. Interestingly there are two ~~cut outs~~ in the shield ~~the way it was~~ that the levers fit into when you turn hard left or right."

"I had to cut off four original mounting tabs of plastic with a Dremel tool. It then fit right on the fairing, and with a little pressure I could mark where to drill the holes for the mounting screws. I used rubber well nuts. Interestingly, there are already two cutouts in the shield that the levers fit into when you turn hard left or right."

@@ Line 7: / Line 7: @@
 '''[http://www.members.aol.com/dukestor/windshield/windshield.html Duke]'''
-Duke makes a 16" tall Touring shield. He also has a smaller Sport model.
+Duke makes a 16" tall Touring shield. He also has a smaller Sport model. Unfortunately, he also has a full-time job and has been unable to meet all requests in recent months. Please email him to see if he can make one for you.
 '''[http://members.cox.net/michealmims/mikesshields.htm gti20vturbo]'''
-Mike has three models available, from 13.5" to 18" tall.
+Mike has three models available, from 13.5" to 18" tall. This is also a hands-on, in-his-spare-time operation, so write ahead of time for availability.
@@ Line 24: / Line 24: @@
 [[Image:reflex01.jpg|200px]] [[Image:reflex02.jpg|150px]] [[Image:reflex03.jpg|180px]]
-Modifications to the windshield in blk95's own words:
+Modifications to the [http://powersports.honda.com/scooters/ Honda NSS250] windshield, in blk95's own words:
-"I had to cut off four original mounting tabs of plastic with a dremmel tool. It then fit right on the fairing and with a little pressure I could mark where to drill the holes for the mounting screws. I used rubber well nuts. Interestingly there are two cut outs in the shield the way it was that the levers fit into when you turn hard left or right."
+"I had to cut off four original mounting tabs of plastic with a Dremel tool. It then fit right on the fairing, and with a little pressure I could mark where to drill the holes for the mounting screws. I used rubber well nuts. Interestingly, there are already two cutouts in the shield that the levers fit into when you turn hard left or right."