Supporting Your Bike While Servicing: Difference between revisions
| Line 56: | Line 56: | ||
3) If you have access to an overhead beam, a ratcheting tie-down (with a large ratchet mechanism) can be strung between the top triple clamp and the beam. Run your strap under one side of the triple, around the rear of the steering stem, then under the triple on the other side and back up to the rafter. Make sure it pulls evenly on both sides of the triple. | 3) If you have access to an overhead beam, a ratcheting tie-down (with a large ratchet mechanism) can be strung between the top triple clamp and the beam. Run your strap under one side of the triple, around the rear of the steering stem, then under the triple on the other side and back up to the rafter. Make sure it pulls evenly on both sides of the triple. | ||
[[image: | [[image:yeild.jpg|150px]] | ||
If you use this method, be careful not to put pressure on any cables or wires, and ensure that the tie-down is pulling on the center of the bike. This is not the best way to do it, but can be useful when supporting under the bike isn't an option. | If you use this method, be careful not to put pressure on any cables or wires, and ensure that the tie-down is pulling on the center of the bike. This is not the best way to do it, but can be useful when supporting under the bike isn't an option. | ||