I want emergency/hazard flashers: Difference between revisions
No edit summary |
No edit summary |
||
| Line 14: | Line 14: | ||
Find the green and grey wires coming out of the turn signal switch. You’re going to need to put extension wires on them so they are long enough to reach your switch position. Always use stranded wire in auto/moto applications. Pictures show stranded (left) and solid (right) wire. | Find the green and grey wires coming out of the turn signal switch. You’re going to need to put extension wires on them so they are long enough to reach your switch position. Always use stranded wire in auto/moto applications. Pictures show stranded (left) and solid (right) wire. | ||
[[image:stranded wire.JPG|100px]] [[Image:solid wire 2.JPG|100px]] | |||
Connect your extensions to the stock wires using crimp connectors and [http://faq.ninja250.org/wiki/Installing_connectors_for_your_wiring#Using_heat_shrink_tubing_to_cover_exposed_wire heat shrink wrap]. | Connect your extensions to the stock wires using crimp connectors and [http://faq.ninja250.org/wiki/Installing_connectors_for_your_wiring#Using_heat_shrink_tubing_to_cover_exposed_wire heat shrink wrap]. | ||
[[Image:Crimp connectors.jpg| | [[Image:Crimp connectors.jpg|100px]] | ||
[[image:heat shrink tubing.jpg|100px]] | |||
[[image:heat shrink.jpg|160px]] | |||
Connectors that are sold with heat shrink already on them are very convenient. | Connectors that are sold with heat shrink already on them are very convenient. | ||
[[image:Heat shrink crimp.jpg]] | [[image:Heat shrink crimp.jpg|110px]] | ||
[[image:Signal_5 edit.jpg|150px]] | [[image:Signal_5 edit.jpg|150px]] | ||
[[image:Signal_7 edit.jpg| | [[image:Signal_7 edit.jpg|80px]] | ||
'''xxx''' connector position needed '''xxx''' | '''xxx''' connector position needed '''xxx''' | ||