Changing gearing J bike: Difference between revisions
No edit summary |
|||
| Line 6: | Line 6: | ||
====Sprocket sizes==== | ====Sprocket sizes==== | ||
The EX250J (08-->) has the same sprocket sizes as the older F model, 14/45 stock, so changing sprocket sizes will yield similar results. See the FAQ page on [[I want to change my gearing | The EX250J (08-->) has the same sprocket sizes as the older F model, 14/45 stock, so changing sprocket sizes will yield similar results. See the FAQ page on [[I want to change my gearing|changing gearing]] and other gearing info in the [[Final Drive]] section. | ||
====Differences between the 2 models==== | ====Differences between the 2 models==== | ||
Revision as of 03:39, 18 April 2010
Why this mod?
When people change the gearing on their bikes, it's usually because they want lower rpm for highway riding. This is achieved via a larger front and/or a smaller rear sprocket.
Sprocket sizes
The EX250J (08-->) has the same sprocket sizes as the older F model, 14/45 stock, so changing sprocket sizes will yield similar results. See the FAQ page on changing gearing and other gearing info in the Final Drive section.
Differences between the 2 models
There are some differences in engine characteristics between the two bikes, but changing sprocket sizes will affect your bike the same as on the older model. The wheel size is also different between the J and F series bikes, but the actual diameter of the wheel and tire is nearly the same. The 130/70-17 rear on the J bike is actually a negligible .2" shorter than the stock 130/80-16 on the F.
Part numbers
Front Sprocket: JTF 1539.xx Rear Sprocket: JTR 486.xx Alloy Rear Sprocket: JTA 486.xx
- xx indicates the number of teeth you want.
To find part #s for other manufacturers, go to the FAQ chain & sprockets page and look them up on the manufacturers' sites.
Owner opinions
- For a review of gearing changes made for touring and a flat landscape, see emdsd's 250 gearing page.
