How to tell if your battery is dead

From Ninja250Wiki
Revision as of 11:44, 11 July 2007 by Bokonon (talk | contribs)
Jump to navigationJump to search
The printable version is no longer supported and may have rendering errors. Please update your browser bookmarks and please use the default browser print function instead.

The following is important information for the DIY rider. Quite often a seemingly impenetrable electrical problem can be traced to a battery that is no longer serviceable. This should be the first thing you look at.

Sometimes a battery just dies. Not necessarily from neglect, age, or use. It just dies. This normally comes from sulfates building up along the bottom and shorting out a couple of the lead plates. It's difficult for many people to trouble-shoot because they'll just toss a voltmeter on the battery and see that it shows 12v DC and right away say it's fine. Here's a bad battery (this one died WHILE the bike was running!). It's being tested with a multimeter to find the voltage drop.

Fresh off the battery tender. 13v is good.

Ignition on. 12v. Only a slight drop.

...and starter thumbed. This is the "drop" part of the equation. You shouldn't see lower than
about 10v DC:

6 volts isn't good. Time to head to the battery store.

Retrieved from "https://ninja250.info/index.php?title=How_to_tell_if_your_battery_is_dead&oldid=4162"